H0 'Skinhead' conversion set

P.K.A. Ausf H0 'Skinhead' conversion set.

Side sensors, front sensor package (apache AH-64), back tanks and additional original details for converting the newly released iconic 2024 Maschinen Krieger Wave 1/20 P.K.A. Ausf H0 kit.

AFS Arms are NOT included in this package, as its designs are part of the Ma.k property.

Although untested, these parts might fit older Nito versions of the 1/20 H0 or similar kits. The additional Shield files are ment as covers for the "Tiger" Exhaust that will nicely fit where the original exhaust of the H0 is placed.

The front optics sensor comes both as an articulated version and a solid single piece version. Although very doable, the articulated version has some very tiny and potentially fragile parts. I would advice to print multiple duplicates and work with the ones that come out best. Use some putty, esp. for the front optics sensor, to assure a snuck fit to the body. Some curves on these kits are just dang hard to get right ;)

These digital STL files are solid and unsupported and are best printed on a Resin printer with decent resolution. Take extra care in placing supports as some details are tiny! Comes without saying but....It is advised to orient parts in a way that any support marks will appear on the least visible surfaces.

The following 33 files are included.
The files that are highlighted in bold are the essential stl's for converting the H0 to the original Skinhead version as created by Kow Yokoyama:

Exhaust_Long.stl
Exhaust_Short.stl
FrontOptics_Singlesolid.stl
FrontSensor_body_H0_2024.stl
FrontSensor_BottomOptics.stl
FrontSensor_opticsCanHub.stl
FrontSensor_opticsCanLeft.stl
FrontSensor_opticsCanRight.stl
FrontSensor_TopCap.stl
HosePackAttachement_var1.stl
HosePackAttachement_var1b.stl
HosePackAttachement_var2.stl
HosePackAttachement_var3.stl
Shield_Bolted_Round.stl
Shield_Bolted_Straight.stl
Shield_Round.stl
Shield_Short_Bolted_Round.stl
Shield_Short_Bolted_Straight.stl
Shield_Short_Round.stl
Shield_Short_Straight.stl
Shield_Straight.stl
SideSensor_Left.stl
SideSensor_Right.stl
Tank_Slim_Bracket.stl
Tank_Slim_Bracket02.stl
Tank_Slim_Tank.stl
Tank_Slim_Tank_Alt01.stl
Tank_Slim_Tank_Alt02.stl
Tank_Thick_Bracket.stl
Tank_Thick_Bracket02.stl
Tank_Thick_Tank.stl
Tank_Thick_Tank_Alt01.stl
Tank_Thick_Tank_Alt02.stl

If you have any questions or issues, feel free to contact me on Facebook DM, Twitter or Instagram @joramvanloenen

This model is in no way associated with, or endorsed by Kow Yokoyama or the Ma.K ZbV3000 property.